Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
BITS Port Configuration Mode Commands
preferred slot ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
preferred slot
Identifies which card in a chassis should assume revertive (redundancy auto-recovery) functionality should the slot/port
being configured go down. There are only two SPIO, one in slot 24 and the other in slot 25.
being configured go down. There are only two SPIO, one in slot 24 and the other in slot 25.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Default: non-revertive operation.
Disables revertive, or auto-recovery, operation for the port.
Identifies the physical slot in the chassis where the SPIO is installed.
Usage
This command enables or disables revertive port redundancy. So after a port failover, when the original port
is restored to service (i.e. link up) the system will return service to that port automatically.
Disabled, which is the default setting, causes non-revertive operation; requiring an administrative user to
manually issue a
is restored to service (i.e. link up) the system will return service to that port automatically.
Disabled, which is the default setting, causes non-revertive operation; requiring an administrative user to
manually issue a
to command to return service to the original port.
Example