Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Card Configuration Mode Commands
header-type ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
header-type
This command defines the size of the header frame for Frame Relay transmissions over a CLC or CLC2 channelized
line card.
line card.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Resets the configuration to the default header size of 2-bytes.
This sets the size, number of bytes, for the header frame.
must be either 2-bytes or 4-bytes.
Instructs the system to execute the command without additional prompting for command confirmation.
Usage
Use this command to set the size of the header frame for Frame Relay messages emanating from the line card.
The size (2-bytes or 4-bytes) determines the amount of information that can be transmitted in that first
information frame.
The size (2-bytes or 4-bytes) determines the amount of information that can be transmitted in that first
information frame.
Important:
Not supported on all platforms
Example
Set the header to the smallest size.
Set the header to the smallest size.