Руководство По Устранению Ошибки для Cisco Cisco Tunnel Terminating Gateway (TTG)
Context Configuration Mode Commands
▀ radius charging server
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
Default: 1812
Specifies the port number to use for communications.
Specifies the port number to use for communications.
must be an integer from 0 through
65535.
Default: 1000
Specifies the relative priority of this accounting server. The priority is used in server selection for
determining which server to send accounting data to.
Specifies the relative priority of this accounting server. The priority is used in server selection for
determining which server to send accounting data to.
must be a value in the range 1 through 1000
where 1 is the highest priority.
Enables or disables the RADIUS { authentication | accounting | charging } server functionality and saves the
status setting in the configuration file to re-establish the set status at reboot.
status setting in the configuration file to re-establish the set status at reboot.
Indicates that the command is to execute without any additional prompt and confirmation from the user.
Usage
This command is used to configure the RADIUS charging server(s) with which the system is to communicate
for Active Charging Services prepaid authentication requests.
for Active Charging Services prepaid authentication requests.
Example
Up to 128 AAA servers can be configured per context when the system is functioning as a PDSN and/or HA. Up to 16
servers are supported per context when the system is functioning as a GGSN.
Up to 128 AAA servers can be configured per context when the system is functioning as a PDSN and/or HA. Up to 16
servers are supported per context when the system is functioning as a GGSN.