Руководство По Устранению Ошибки для Cisco Cisco Tunnel Terminating Gateway (TTG)

Скачать
Страница из 5302
  ACL Configuration Mode Commands 
redirect css service (by IP packets)  ▀   
Cisco ASR 5000 Series Command Line Interface Reference  ▄  
 
  OL-22948-01 
This option is used in conjunction with the 
 option to specify a group of addresses for which 
packets are to be filtered. 
The mask must be entered as a complement: 
 
Zero-bits in this parameter mean that the corresponding bits configured for the 
 
parameter must be identical. 
 
One-bits in this parameter mean that the corresponding bits configured for the 
 
parameter must be ignored. 
Important:
  The mask must contain a contiguous set of one-bits from the least significant bit (LSB). Therefore, 
allowed masks are 0, 1, 3, 7, 15, 31, 63, 127, and 255. For example, acceptable wildcards are 0.0.0.3, 0.0.0.255, and 
0.0.15.255. A wildcard of 0.0.7.15 is not acceptable since the one-bits are not contiguous. 
Indicates packet redirection is to be applied to IP packet fragments only. 
Usage
 
Block IP packets when the source and destination are of interest. 
Important:
  A maximum of 16 rule definitions can be configured per ACL. Also note that ―redirect‖ rule 
definitions are ignored for ACLs applied to specific subscribers or all subscribers facilitated by a specific context. 
Example 
The following command defines a rule definition that redirects packets to the charging service named 
, and IP 
packets coming from the host with the IP address 
, and fragmented packets for any destination are 
matched. 
 
 
 
The following sets the insertion point before the rule definition above. 
 
 
 
The following command sets the insertion point after the first rule definition above. 
 
 
 
The following deletes the first rule definition above.