Руководство По Устранению Ошибки для Cisco Cisco Tunnel Terminating Gateway (TTG)
Card Configuration Mode Commands
▀ redundancy
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
Important:
Not supported on all platforms
Important:
You do not need to enter this command for each LC or SPIO card, as the system intuitively
understands that if the command is entered for an active LC or SPIO card, the standby LC or SPIO card switches to
operate in the same mode. For example, entering the
operate in the same mode. For example, entering the
command for an LC in slot 17 automatically enables
a redundant LC in slot 33 for port redundant operation.
Example
The following command sets the redundancy mode to port redundancy.
The following command sets the redundancy mode to port redundancy.