Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
APN Configuration Mode Commands
▀ dhcp context-name
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
dhcp context-name
Configures the name of the context on the system in which Dynamic Host Control Protocol (DHCP) functionality is
configured.
configured.
Product
GGSN, P-GW
Privilege
Security Administrator, Administrator
Syntax
Removes a previously configured context name.
The name of a context configured on the system in which one or more DHCP services are configured. It can
be from 1 to 79 alpha and/or numeric characters in length and is case sensitive.
be from 1 to 79 alpha and/or numeric characters in length and is case sensitive.
Usage
If the APN is to support dynamic address assignment via DHCP (either the proxy or relay mode), this
parameter must be configured to point the APN to the name of a pre-configured context on the chassis in
which one or more DHCP services are configured.
The command can be used to identify a single DHCP service instance within the specified context to use to
facilitate the address assignment.
parameter must be configured to point the APN to the name of a pre-configured context on the chassis in
which one or more DHCP services are configured.
The command can be used to identify a single DHCP service instance within the specified context to use to
facilitate the address assignment.
Example
The following command configures the APN to look for DHCP services in a context called
The following command configures the APN to look for DHCP services in a context called