Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Card Configuration Mode Commands
mode ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
mode
Sets the application processor card‘s current administrative state to active or standby.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Returns the mode to the default value appropriate to the card type.
The default administrative mode for line cards affects a single card and its mated line card. The default state
for line cards in the top shelf is active. The default for line cards in the bottom shelf is standby.
The default administrative state for the SPIO in slot 24 is active and the SPIO in slot 25 is standby.
The default administrative mode for packet processing cards is standby.
The default administrative mode for line cards affects a single card and its mated line card. The default state
for line cards in the top shelf is active. The default for line cards in the bottom shelf is standby.
The default administrative state for the SPIO in slot 24 is active and the SPIO in slot 25 is standby.
The default administrative mode for packet processing cards is standby.
Important:
This command results in a migration of processes if the default mode for a card is different than the
current state of the card.
Defines which card type is to be switched from standby to active state. If a card is present in the slot, the
packet processing card is automatically selected depending upon the type of card. If no card is present in the
slot, a packet processing card is assumed.
packet processing card is automatically selected depending upon the type of card. If no card is present in the
slot, a packet processing card is assumed.
: Identifies a PAC
: Identifies a PSC or PSC2
: Identifies a PSC or PSC2
Sets the PAC, PSC, or PSC2 in the slot to standby mode.
Caution:
Switching an active packet processing card to standby deletes all port configurations, including
bindings, for the attached line cards.
Instructs the system to execute the command without additional prompting for command confirmation.
Usage
Set the desired mode of mated cards. The card targeted for maintenance is placed in the standby state first.
The setting of the mode determines which packet processing cards are to be active and which are to be the
standby cards for redundancy. Use this command to configure the set of active and standby packet processing
The setting of the mode determines which packet processing cards are to be active and which are to be the
standby cards for redundancy. Use this command to configure the set of active and standby packet processing