Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Context Configuration Mode Commands
▀ cscf service
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
cscf service
Creates a CSCF service or specifies an existing CSCF service and enters the CSCF Service Configuration Mode for the
current context.
current context.
Product
SCM
Privilege
Administrator
Syntax
Specifies the name of the CSCF service. If
does not refer to an existing service, the new
service is created if resources allow.
must be from 1 to 63 alpha and/or numeric characters.
Indicates that the command is to execute without any additional prompt and confirmation from the user.
Removes the specified CSCF service from the context.
Usage
Enter the CSCF Service Configuration Mode for an existing service or for a newly defined service. This
command is also used to remove an existing service.
A maximum of 256 services (regardless of type) can be configured per system.
command is also used to remove an existing service.
A maximum of 256 services (regardless of type) can be configured per system.
Caution:
Large numbers of services greatly increase the complexity of management and may impact overall
system performance (for example, resulting from such things as system handoffs). Therefore, it is recommended that a
large number of services only be configured if your application absolutely requires it. Please contact your local service
representative for more information.
large number of services only be configured if your application absolutely requires it. Please contact your local service
representative for more information.
Entering this command results in the following prompt:
CSCF Service Configuration Mode commands are defined in the CSCF Service Configuration Mode
Commands chapter.
Use this command when configuring the following SCM components: P-CSCF, S-CSCF, SIP Proxy.
Commands chapter.
Use this command when configuring the following SCM components: P-CSCF, S-CSCF, SIP Proxy.
Example