Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Context Configuration Mode Commands
mpls bgp forwarding ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
mpls bgp forwarding
This command globally enables the MPLS BGP forwarding.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Disables MPLS BGP forwarding configured on the system.
Usage
Use this command to globally enable the MPLS BGP forwarding. By enabling this command, the BGP
VPNv4 routes need not have an underlying LSP to forward the IP packets. If this command is not enabled,
then the nexthop for the BGP routes must be reachable via LDP.
VPNv4 routes need not have an underlying LSP to forward the IP packets. If this command is not enabled,
then the nexthop for the BGP routes must be reachable via LDP.
Caution:
This command should be enabled ONLY when all the BGP peering where VPNv4 routes are
exchanged are one hop away.
Example
Following command enables the MPLS BGP forwarding on system:
Following command enables the MPLS BGP forwarding on system: