Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
DHCP Service Configuration Mode Commands
▀ bind
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
bind
This command binds the DHCP service to a logical IP interface facilitating the system‘s connection to the DHCP server.
This command also configures traffic from the specified DHCP service bind address to use the specified Multiple
Protocol Label Switching (MPLS) labels.
This command also configures traffic from the specified DHCP service bind address to use the specified Multiple
Protocol Label Switching (MPLS) labels.
Product
GGSN, ASN-GW
Privilege
Security Administrator, Administrator
Syntax
Removes a previously configured binding.
Specifies the IP address of an interface in the current context through which the communication with the
DHCP server occurs.
DHCP server occurs.
must be expressed in dotted decimal notation.
Specifies the next hop gateway address for in MPLS network to which the packets with MPLS labels will be
forwarded.
forwarded.
must be expressed in IPv4/IPv6 notation.
This keywork specifies the MPLS label to identify inbound traffic destined for the configured DHCP service
bind address
bind address
.
is the MPLS label that will identify inbound traffic destined for the configured
DHCP service and must be an integer from 16 through 1048575.
Important:
This keyword is license-enabled and available with valid MPLS feature license only.
Caution:
For DHCP over MPLS feature to work in StarOS 9.0 onward
command must be
configured in DHCP service. Without
command the DHCP service using MPLS labels will not be
started and as a part of DHCP over MPLS configuration in StarOS 9.0 onward this keyword is a critical parameter for
the DHCP-Service. Any change in its value will result in DHCP-service restart and clearing of the existing calls.
the DHCP-Service. Any change in its value will result in DHCP-service restart and clearing of the existing calls.