Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
eGTP Service Configuration Mode Commands
▀ validation-mode
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
validation-mode
Configures the type of validation to be performed on messages received by this service.
Product
P-GW
Privilege
Administrator
Syntax
Returns the command to the default setting of
.
: Specifies that the message should be validated based on a vendor-specific set of mandatort
elements.
: Specifies that the message should be validated based on the set of mandatort elements as defined
in 3GPP 29.274.
Usage
Use this command to specify the type of validation performed on messages received by this service. The
information elements contained in messages have mandatory elements and conditional elements. The
standard set of elements, as defined by 3GPP 29.274 is checked if this command is set to ―standard‖. The
custom1 setting is for a vendor-specific set of mandatory elements.
information elements contained in messages have mandatory elements and conditional elements. The
standard set of elements, as defined by 3GPP 29.274 is checked if this command is set to ―standard‖. The
custom1 setting is for a vendor-specific set of mandatory elements.
Example
The flowering command sets the validation mode for incoming messages to standard:
The flowering command sets the validation mode for incoming messages to standard: