Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Exec Mode Commands (A-C)
▀ card restart
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
card restart
This performs a soft-reset of the target card causing all application processes to restart.
Product
All
Privilege
Security Administrator, Administrator, Operator
Syntax
Indicates the slot number of the card which is the target of the restart.
Indicates the restart is to take place ignoring any state or usage warnings that might be generated.
Indicates that the command is to execute without any additional prompt and confirmation from the user.
Usage
Restarting a card may be useful when a card is not performing as expected (performance drop, increased
response delays, etc.). A restart may be preferred to a reboot as the card becomes available in less time than a
reboot.
When this command is issued for an active card, the user is prompted for confirmation unless the -force
and/or -noconfirm keywords are used. Because the reboot of standby or redundant cards is non-service
impacting, the reboot proceeds immediately after the command execution without user confirmation.
response delays, etc.). A restart may be preferred to a reboot as the card becomes available in less time than a
reboot.
When this command is issued for an active card, the user is prompted for confirmation unless the -force
and/or -noconfirm keywords are used. Because the reboot of standby or redundant cards is non-service
impacting, the reboot proceeds immediately after the command execution without user confirmation.
Important:
Caution should be taken in using this command as restarting a card which has no redundant card
available may cause a service interruption and loss of active sessions.
Important:
This command is not supported on all platforms.
Caution:
The
and
options should only be used concurrently by experienced users as
this will cause an immediate restart regardless of warnings and no confirmation from the user.
Example
The following will cause the card in slot to restart without any confirmation from the user. The card will not reboot if
there are any warnings generated.
The following will cause the card in slot to restart without any confirmation from the user. The card will not reboot if
there are any warnings generated.