Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Exec Modes Commands (D-S)
▀ sgsn offload
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
sgsn offload
This command instructs the SGSN to begin the offloading procedure and actually starts and stops the offloading of
subscribers which is part of the SGSN‘s Gb (2G) or Iu (3G) Flex load redistribution functionality.
subscribers which is part of the SGSN‘s Gb (2G) or Iu (3G) Flex load redistribution functionality.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
A unique string of 1 to 63 alphanumeric characters that identifies a specific GPRS service that has already
been defined for the 2G SGSN configuration.
been defined for the 2G SGSN configuration.
A unique string of 1 to 63 alphanumeric characters that identifies a specific SGSN service that has already
been defined for the 3G SGSN configuration.
been defined for the 3G SGSN configuration.
Instructs the SGSN to off load any subscribers sending an ‗activate request‘ message.
Instructs the SGSN to off load any subscribers sending either an ‗attach request‘ or a ‗RAU request‘ message.
Instructs the SGSN to check the P-TMSI and use the SGSN matching the configured NRI value to off load
subscribers.
subscribers.
Must be an integer from 1 to 63 to identify a specific SGSN in a pool. Use of 0 (zero) value
is not recommended.
Instructs the SGSN to stop offloading subscribers from the pool area.
Configures the timer for sending period RAUs to the MS. Default is 4 seconds.
Must be an integer from 2 to 60.
Usage
Use this command to configured the offloading of subscribers which is a part of the SGSN‘s load
redistribution operation. This command can be used anytime an SGSN is to be taken out of service.
redistribution operation. This command can be used anytime an SGSN is to be taken out of service.