Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Exec Mode Show Commands (A-C)
▀ show apn
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
show apn
Displays configuration information for either a specific or all configured APNs.
Product
GGSN
Privilege
Security Administrator, Administrator, Operator, Inspector
Syntax
Displays information on all APNs configured on the system.
Displays information for a specific APN.
is the name of the APN and can be from 1 to 62 alpha and/or numeric characters and is case
sensitive.
Indicates the output of the command is to be piped (sent) to the command specified. A command to send
output to must be specified.
For details on the usage of
output to must be specified.
For details on the usage of
and
options, refer to the Regulating a Command’s Output section of
the Command Line Interface Overview chapter.
Usage
This command is used to verify the configuration of one or all APNs for monitoring or troubleshooting
purposes. The output is a concise listing of APN parameter settings.
If this command is executed from within the local context with the all keyword, information for all APNs
configured on the system will be displayed.
purposes. The output is a concise listing of APN parameter settings.
If this command is executed from within the local context with the all keyword, information for all APNs
configured on the system will be displayed.
Example
The following command displays configuration information for all APNs:
The following command displays configuration information for all APNs:
Important:
Output descriptions for commands are available in the Statistics and Counters Reference.