Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Firewall-and-NAT Policy Configuration Mode Commands
firewall policy ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
firewall policy
This command enables/disables Stateful Firewall support in a Firewall-and-NAT policy.
Important:
In StarOS 8.0, this configuration is available in the ACS Configuration Mode. In StarOS 8.1, for
Rulebase-based Stateful Firewall configuration, this configuration is available in the ACS Rulebase Configuration
Mode. In StarOS 8.3, this configuration is available in the ACS Rulebase Configuration Mode.
Mode. In StarOS 8.3, this configuration is available in the ACS Rulebase Configuration Mode.
Product
FW
Privilege
Security Administrator, Administrator
Syntax
Disables Stateful Firewall support in the Firewall-and-NAT policy.
Enables Stateful Firewall support in the Firewall-and-NAT policy.
Usage
Use this command to enable/disable Stateful Firewall support for all subscribers using a Firewall-and-NAT
policy.
policy.
Example
The following command enables Stateful Firewall support in a Firewall-and-NAT policy:
The following command enables Stateful Firewall support in a Firewall-and-NAT policy:
The following command disables Stateful Firewall support in a Firewall-and-NAT policy: