Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
GGSN Service Configuration Mode Commands
gtpu reorder ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
Usage
Use this command to control data packet re-ordering between the GGSN and SGSN.
If re-ordering is enabled for the GGSN service, the GGSN informs the SGSN to also reorder the data packets
from the GGSN. The GGSN informs the SGSN in the create PDP context response. The GGSN and SGSN
optionally insert sequence numbers into the data packets that they send.
If re-ordering is enabled for the GGSN service, the GGSN informs the SGSN to also reorder the data packets
from the GGSN. The GGSN informs the SGSN in the create PDP context response. The GGSN and SGSN
optionally insert sequence numbers into the data packets that they send.
Example
The following command specifies that the GGSN service re-sequences data packets received from the SGSN for PPP
PDP context types:
The following command specifies that the GGSN service re-sequences data packets received from the SGSN for PPP
PDP context types:
The following command specifies that the GGSN service inserts sequence numbers for both IP and PPP PDP context
types into data packets it is sending to the SGSN for PPP PDP context types:
types into data packets it is sending to the SGSN for PPP PDP context types: