Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Global Configuration Mode Commands
▀ snmp heartbeat
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
snmp heartbeat
Enables the sending of periodic ―heartbeat‖ notifications (traps).
Product
All
Privilege
Administrator
Syntax
Returns the command to its default setting of disabled.
Disables the feature.
Default: 60
Specifies the interval time, in minutes, between notifications.
Specifies the interval time, in minutes, between notifications.
must be an integer value between 1
and 1440.
Default: 30
Specifies the secondary interval time, in seconds, between notifications.
Specifies the secondary interval time, in seconds, between notifications.
must be an integer value
between 10 and 50.
Usage
Use this command to enable the sending of a heartbeat notification periodically to confirm a system is up and
communicating.
communicating.
Example
The following command sets the snmp heartbeat notification interval to 2 hours, 15 minutes and 30 seconds:
The following command sets the snmp heartbeat notification interval to 2 hours, 15 minutes and 30 seconds: