Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Global Configuration Mode Commands
threshold total-mme-sessions ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
threshold total-mme-sessions
Use this command to configure thresholds for the total number of MME sessions across all the MME services in the
system.
system.
Product
MME
Privilege
Security Administrator, Administrator
Syntax
Default: 0 (Disabled)
The high threshold number of total MME sessions that must be met or exceeded within the polling interval to
generate an alert or alarm.
The number can be configured to any integer value from 0 through 4000000. A value of 0 disables the
threshold.
The high threshold number of total MME sessions that must be met or exceeded within the polling interval to
generate an alert or alarm.
The number can be configured to any integer value from 0 through 4000000. A value of 0 disables the
threshold.
Default: 0 (Disabled)
The low threshold number of total MME sessions that maintains a previously generated alarm condition. If
the number of MME sessions, across all the services in a system, falls beneath the low threshold within the
polling interval, a clear alarm will be generated.
The number can be configured to any integer value between 0 and 4000000. A value of 0 disables the
threshold.
The low threshold number of total MME sessions that maintains a previously generated alarm condition. If
the number of MME sessions, across all the services in a system, falls beneath the low threshold within the
polling interval, a clear alarm will be generated.
The number can be configured to any integer value between 0 and 4000000. A value of 0 disables the
threshold.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the high threshold.
Usage
Use this command to monitor and set alarms or alerts when the total number of MME sessions across all the
MME services in the system is equal to or greater than the set limit.
Alerts or alarms are triggered for the total number of MME sessions based on the following rules:
MME services in the system is equal to or greater than the set limit.
Alerts or alarms are triggered for the total number of MME sessions based on the following rules:
Enter condition: Actual total number of MME sessions ³ High Threshold
Clear condition: Actual total number of MME sessions < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end
of the polling interval.
Refer to the
of the polling interval.
Refer to the
command to configure the polling interval and
the
command to enable thresholding for this value.
Example