Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
GPRS Service Configuration Mode Commands
▀ nri
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
nri
This command configures the network resource identifier (NRI) to identify a specific SGSN. The NRI is stored in the P-
TMSI. The SGSN uses a portion of this NRI to set the parameters for Gb flex (SGSN pooling) functionality.
TMSI. The SGSN uses a portion of this NRI to set the parameters for Gb flex (SGSN pooling) functionality.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Removes the configured NRI value and location in P-TMSI for retrieval by this SGSN operator policy.
Specifies the number of bits to be used in the P-TMSI, bits 23 to 18. to define the network resource identifier
(NRI). The NRI length configuration also sets the maximum size of the pool. If not configured, the NRI
length will be of zero length.
(NRI). The NRI length configuration also sets the maximum size of the pool. If not configured, the NRI
length will be of zero length.
: Must be an integer from 1 to 6 to identify the number of bits.
Configures the null NRI value which must be unique across the pool areas. This keyword is used for the
offloading procedure for SGSN pooling (enabled with the
offloading procedure for SGSN pooling (enabled with the
command, see the Exec
Mode chapter).
: 0 (zero) indicates the keyword is not to be used and 1 to 63 are used to identify the
SGSN to be used for the offloading procedure for SGSN pooling. There is no default value for this parameter.
Defines the non-broadcast LAC/RAC to be used in combination with the null-NRI for the offloading
procedure.
procedure.
defines a location area code associated with a BSS. Must be an integer between 1 and 65535.
defines the remote area code to be associated with a BSS. Must be an integer between 1 and 255.
defines the remote area code to be associated with a BSS. Must be an integer between 1 and 255.
Specifies the MS-assigned value of the NRI to retrieve from the P-TMSI. This value must not exceed the
maximum possible value specified by the NRI length. The NRI value must be unique across the pool or
across all overlapping pools.
maximum possible value specified by the NRI length. The NRI value must be unique across the pool or
across all overlapping pools.
must be an integer from 1 to 63 to identify a specific SGSN in a pool. Use of 0 (zero) value is
not recommended.
Multiple NRI values can be identified by providing multiple nri-values separated by a blank space for
example:
Multiple NRI values can be identified by providing multiple nri-values separated by a blank space for
example: