Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
IKEv2 Security Association Configuration Mode Commands
▀ lifetime
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
lifetime
Configure the lifetime of a security association (SA) in seconds.
Product
PDIF
Privilege
Security Administrator, Administrator
Syntax
Default: 86400
Sets the value of the timeout parameter.
Sets the value of the timeout parameter.
must be an integer from 60 to 86400.
Usage
The secret keys that are used for various aspects of a configuration should only be used for a limited amount
of time before timing out. This exposes a limited amount of data to the possibility of hacking. If the SA
expires, the options are then to either close the SA and open an new one, or renew the existing SA.
of time before timing out. This exposes a limited amount of data to the possibility of hacking. If the SA
expires, the options are then to either close the SA and open an new one, or renew the existing SA.
Example
The following command sets the lifetime timeout to be the default value (86400):
The following command sets the lifetime timeout to be the default value (86400):