Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Link Configuration Mode Commands
▀ mtp2-lssu-len
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
mtp2-lssu-len
This command sets the length of the link status signal unit (LSSU) which carries link status information used to manage
link alignment and indicate the status of the signaling points to each other.
link alignment and indicate the status of the signaling points to each other.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Using this keyword with the command resets the length to the default of 1 octet.
Sets the number of octets for the length of the LSSU.
: Must be either 1 or 2.
Usage
Use this command to define the maximum amount of link status information that is to be shared between
signaling points.
signaling points.
Example
You can use the following command to set the LSSU length to 2 octets - the maximum length:
You can use the following command to set the LSSU length to 2 octets - the maximum length: