Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
OSPF Configuration Mode Commands
area default-cost ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
area default-cost
This command configures the default cost for an area.
Product
PDSN, HA, GGSN
Privilege
Security Administrator, Administrator
Syntax
{
|
}
{
|
}
Deletes the default cost for the area.
The IP address, in IPv4 dotted-decimal notation, of the area.
The identification number of the area. This must be an integer from 0 through 4294967295.
The default cost to be configured for the specified area. This must be an integer from 0 through 16777215.
Usage
Use this command to configure the default cost for an OSPF area.
Example
The following command sets the default cost for an OSPF area defined by the IP address
The following command sets the default cost for an OSPF area defined by the IP address
to
:
area
default-cost