Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
OSPF Configuration Mode Commands
redistribute ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
redistribute
This command redistributes routes into OSPF. This means that any routes from another protocol are redistributed to
OSPF neighbors using the OSPF protocol.
OSPF neighbors using the OSPF protocol.
Product
PDSN, HA, GGSN
Privilege
Security Administrator, Administrator
Syntax
{
|
|
} [
] [
{ | } ] [
]
{
|
|
}
Specifies that BGP routes will be redistributed.
Important:
BGP routing is only supported for use with the HA.
Disables the redistributed.
Specifies that connected routes will be redistributed.
Specifies that RIP routes will be redistributed. (RIP is not supported at this time.)
Specifies that static routes will be redistributed.
Sets the OSPF metric used in the redistributed route. This must be an integer from 1 through 16777214.
Default: 2
Sets route metric type that is applied to redistributed routes.
1 : Sets the OSPF external link type for routes to Type 1.
2 : Sets the OSPF external link type for routes to Type 2.
Sets route metric type that is applied to redistributed routes.
1 : Sets the OSPF external link type for routes to Type 1.
2 : Sets the OSPF external link type for routes to Type 2.
Filter routes through the specified route map before redistribution.
specifies the name of
the route-map to use and must be specified as a string of 1 through 79 alphanumeric characters.