Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
ACS Packet Filter Configuration Mode Commands
▀ ip remote-port
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
ip remote-port
This command configures the IP remote port parameter for the packet filter.
Product
ACS
Privilege
Security Administrator, Administrator
Syntax
Removes the remote port configuration, if previously configured.
Specifies port number of the transport protocol.
must be the port number, and must be an integer from 1 through 65535.
Specifies a range of port numbers.
and
must be integers from 1 through 65535.
must be greater than
.
Usage
Use this command to configure a specific or range of IP remote port settings for a packet filter.
Example
The following command configures the IP remote port as
The following command configures the IP remote port as
: