Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Subscriber Configuration Mode Commands
▀ content-filtering category
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
content-filtering category
This command enables/disables the specified preconfigured Category Policy Identifier for policy based Content
Filtering support to the subscriber.
Filtering support to the subscriber.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Disables the configured category policy ID for content filtering support to the subscriber. This is the default
setting.
setting.
This command applies the content filtering category policy ID, configured in ACS Configuration Mode, to
this subscriber.
this subscriber.
must be a category policy ID, and must be an integer from 1 through 4,294,967,295.
If the specified category policy ID is not configured in the ACS Configuration Mode, all packets will be
passed regardless of the categories determined for such packets.
passed regardless of the categories determined for such packets.
Important:
Category Policy ID configured through this mode overrides the Category Policy ID configured using
the
command in the ACS Rulebase Configuration Mode.
Usage
Use this command to enter the Content Filtering Policy Configuration Mode and to enable or disable the
Content Filtering Category Policy ID for a subscriber.
Content Filtering Category Policy ID for a subscriber.
Important:
If Content Filtering Category Policy ID is not specified here the similar command in the ACS
Rulebase Configuration Mode determines the policy.
Up to 64 different policy identifier can be defined in a Content Filtering support service.
Example
The following command enters the Content filtering Policy Configuration Mode and enables the Category Policy ID
The following command enters the Content filtering Policy Configuration Mode and enables the Category Policy ID
for Content Filtering support: