Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
APN Configuration Mode Commands
content-filtering category ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
content-filtering category
This command enables/disables the specified pre-configured Category Policy Identifier for Category-based Content
Filtering support.
Filtering support.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Disables the previously configured category policy identifier for Content Filtering support to the APN. This is
the default setting.
the default setting.
This command applies the specified content filtering category policy ID, configured in the ACS
Configuration Mode, to this APN.
Configuration Mode, to this APN.
must be a category policy ID, and must be an integer from 1 through 4,294,967,295.
In case the specified category policy ID is not configured in the ACS Configuration Mode, all packets will be
passed regardless of the categories determined for such packets.
passed regardless of the categories determined for such packets.
Important:
Category Policy ID configured through this mode overrides the Category Policy ID configured
through
command in the ACS Rulebase Configuration Mode.
Usage
Use this command to enter the Content Filtering Policy Configuration Mode and to enable or disable the
Content Filtering Category Policy ID for an APN.
Content Filtering Category Policy ID for an APN.
Important:
If Content Filtering Category Policy ID is not specified here the similar command in the ACS
Rulebase Configuration Mode determines the policy.
Up to 64 different policy IDs can be defined.
Example
The following command enters the Content Filtering Policy Configuration Mode and enables the Category Policy ID
The following command enters the Content Filtering Policy Configuration Mode and enables the Category Policy ID
for Content Filtering support: