Руководство По Устранению Ошибки для Cisco Cisco Tunnel Terminating Gateway (TTG)
AAA Server Group Configuration Mode Commands
▀ radius accounting server
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
Enables and disables sending of the Accounting-On message when a new RADIUS server is added to the
configuration.
When this is enabled, the Accounting-On message is sent when a new RADIUS server is added in the
configuration. However, if for some reason the Accounting-On message cannot be sent at the time of server
configuration (for example; if the interface is down), then the message is sent as soon as possible. Once the
Accounting-On message is sent, if it is not responded to after the configured RADIUS accounting timeout,
the message is retried the configured number of RADIUS accounting retries. Once all retries have been
exhausted, the system no longer attempts to send the Accounting-On message for this server.
Default: disable
configuration.
When this is enabled, the Accounting-On message is sent when a new RADIUS server is added in the
configuration. However, if for some reason the Accounting-On message cannot be sent at the time of server
configuration (for example; if the interface is down), then the message is sent as soon as possible. Once the
Accounting-On message is sent, if it is not responded to after the configured RADIUS accounting timeout,
the message is retried the configured number of RADIUS accounting retries. Once all retries have been
exhausted, the system no longer attempts to send the Accounting-On message for this server.
Default: disable
Disables and enables the sending of the Accounting-Off message when a RADIUS server is removed from
the configuration.
The Accounting-Off message is sent when a RADIUS server is removed from the configuration, or when
there is an orderly shutdown. However, if for some reason the Accounting-On message cannot be sent at this
time, it is never sent. The Accounting-Off message is sent only once, regardless of how many accounting
retries are enabled.
Default: enable
the configuration.
The Accounting-Off message is sent when a RADIUS server is removed from the configuration, or when
there is an orderly shutdown. However, if for some reason the Accounting-On message cannot be sent at this
time, it is never sent. The Accounting-Off message is sent only once, regardless of how many accounting
retries are enabled.
Default: enable
Specifies the maximum number of outstanding messages that may be allowed to the server.
must be an integer from 1 through 256.
Default: 0
Sets the UDP communication port to the out of date standardized default for RADIUS communications to
1646.
1646.
Specifies the relative priority of this accounting server. The priority is used in server selection for
determining which server to send accounting data to.
determining which server to send accounting data to.
must be an integer from 1 through 1000, where 1 is the highest priority. When configuring two
or more servers with the same priority you will be asked to confirm that you want to do this. If you use the
option, you are not asked for confirmation and multiple servers could be assigned the same
priority.
Default: 1000
Default: 1000
: Obsolete keyword.
Specifies the type of AAA transactions to use to communicate with this RADIUS server.
: Use standard AAA transactions.
Default:
Configures the admin-status for the RADIUS accounting server.
: Enables the RADIUS accounting server.
: Disables the RADIUS accounting server.