Руководство По Устранению Ошибки для Cisco Cisco Tunnel Terminating Gateway (TTG)
Radio Network Controller (RNC) Configuration Mode Commands
▀ reset-resource
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
reset-resource
This command enables the operator to control message length by configuring the number of IuConIDs sent in each
RANAP Reset Resource messages.
RANAP Reset Resource messages.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Resets the number of Iu connection Ids included in the Reset Resource messages. Default is 250.
Sets the number of Iu connection Ids to be included in the Reset Resource messages.
: Integer from 1 to 250.
Default : 250
Usage
Id numbers for each Iu connection are included in the RANAP Reset Resource messages. Including this
potentially long stream of numbers can make the message very long. With this command, the operator can
control the size of the messages by controlling the number of Id messages included in the messages.
potentially long stream of numbers can make the message very long. With this command, the operator can
control the size of the messages by controlling the number of Id messages included in the messages.
Example
Limit the number of Iu connection Ids to 30:
Limit the number of Iu connection Ids to 30: