Руководство По Обслуживанию для Cisco Cisco Packet Data Gateway (PDG)

Configuration Management

Generally Available 06-30-2010

3-2

New Configuration Commands

Common Commands - New in Release 8.0

This section provides information on new commands that are common to products in
Release 8.0.

aaa accounting-overload-protection

This command configures Overload Protection Policy for accounting requests.

CLI (Global Configuration Mode)

aaa accounting-overload-protection prioritize-gtpp

[ default | no ] aaa accounting-overload-protection

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

alarm-disable

The new command disables the alarm detection for designated sets of alarms on the
Channelized line card.

CLI (Channelized Port Configuration Mode)

alarm-disable ( all | ds1-e1 | none | sonet-sdh }

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

alarm-soak-timer

This command sets the timer for the duration that a detected alarm will be soaked before the
alarm is reported.

CLI (Channelized Port Configuration Mode)

alarm-soak-timer seconds

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

card smc upgrade

This command upgrades programmables on the specified card. Must be followed by a slot
number of card to upgrade.

AUTION

This command should only be used if instructed by or working with Starent Support.

CLI (Exec Mode)

card smc upgrade

slot_number