Руководство По Обслуживанию для Cisco Cisco Packet Data Gateway (PDG)

Configuration Management

Generally Available    06-30-2010 

3-104

This command defines rule definition to analyze and charge user traffic based on 
destination Transmission Control Protocol (TCP) port. The 

port-map port_map 

option was added to this command. This enables the port number to 

be selected from a range configured in a port map.

[ no ] tcp dst-port { operator port_number | { !range | range } { 

start_range to end_range | port-map port_map } }

This functionality is not supported at this time on the Web Element Manager.

This command defines rule definition to analyze and charge user traffic based on source 
Transmission Control Protocol (TCP) port. The 

{ !range | range } port-map port_map 

option was added to this command. This enables the port number to be selected from a 
range configured in a port map.

[ no ] tcp src-port { operator port_number | { !range | range } { 

start_range to end_range | port-map port_map } }

This functionality is not supported at this time on the Web Element Manager.

This command defines rule definition to analyze and charge user traffic based on 
destination User Datagram Protocol (UDP) port number. The 

port-map port_map 

option was added to this command. This enables the port number to 

be selected from a range configured in a port map.

[ no ] udp dst-port { operator port_number | { !range | range } { 

start_range to end_range | port-map port_map } }

This functionality is not supported at this time on the Web Element Manager.

This command defines rule definition to analyze and charge user traffic using either 
(destination or source) User Datagram Protocol (UDP) port. The 

port-map port_map 

option was added to this command. This enables the port number to 

be selected from a range configured in a port map.

[ no ] udp either-port { operator port_number | { !range | range } { 

start_range to end_range | port-map port_map } }