Руководство По Обслуживанию для Cisco Cisco Packet Data Gateway (PDG)
Generally Available 06-30-2010
New Commands
5-3
Common Commands - New in Release 8.1
show hd raid
A new show command has been created to show the RAID created on the ST40 SMC hard
disks.
disks.
CLI (Exec Mode)
show hd raid [ verbose ]
Web Element Manager Path
This functionality is not supported on the Web Element Manager at this time.
show ipv6 interface summary
Presents a summary of all configured ipv6 interfaces
CLI (Exec Mode)
show ipv6 interface summary
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
show ipv6 neighbor
A new command to show connected IPv6 neighbor addresses
CLI (Exec Mode)
show ipv6 neighbors [ ipv6 address ]
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
show ipv6 route
Shows ipv6 route to next gateway
CLI (Exec Mode)
show ipv6 route [ ipv6 prefix/prefix length ]
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
show port info
This command has been modified to include search capabilities for VLAN ID
The output for this command has been modified to show LACP.
CLI (Exec Mode)
show port info slotnum/portnum