Руководство По Обслуживанию для Cisco Cisco Packet Data Gateway (PDG)
Performance Management
Generally Available 06-30-2010
5-94
show sgtpu statistics
The output of this command is now enhanced with the following counters to count the
packets and bytes that are dropped due to DP session in suspended state:
packets and bytes that are dropped due to DP session in suspended state:
●
Total Packets Rcvd
●
Pkts when dp suspended
●
Total Bytes Rcvd
●
Pkts when dp suspended
CLI (Exec Mode)
show sgtpu statistics [ ggsn-address ipv4_address | iups-service
iups_srvc_name | rnc-address ipv4_address | sgtp-service sgtp_srvc_name |
gprs-service gprs_srvc_name nsei nse_id ]
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
show gprs-service all
The output of this command is now enhanced with the “SM-Ignore PCO IE Decode Error”
parameter to ignore decoding error due to incorrect PCO IE length in SM messages.
parameter to ignore decoding error due to incorrect PCO IE length in SM messages.
CLI (Exec Mode)
show gprs-service all
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
show gprs-service all
The output of this command is now enhanced with the following counters:
●
SM-Trim Trailing Spaces in APN
●
SM-APN Partial match
CLI (Exec Mode)
show gprs-service all
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
show gmm-sm statistics
The output of this command is now enhanced with the following counters:
●
Auth Triplets Reuse Counter
●
3G-Auth Triplets Reuse
●
2G-Auth Triplets Reuse
CLI (Exec Mode)
show gmm-sm statistics [ verbose ]