Руководство По Устранению Ошибки для Cisco Cisco Tunnel Terminating Gateway (TTG)
Service Configuration Procedures
▀ Creating and Configuring FA Services
▄ Cisco ASR 5000 Series Access Service Network Gateway Administration Guide
OL-22953-01
Keyword/Variable
Description
Specifies the maximum number of subscribers that can access this service on this interface. Specify any integer
from 0 to 500,000. The default is 500,000.
from 0 to 500,000. The default is 500,000.
Important:
The maximum number of subscribers supported is dependent on the session
capacity license installed and the number of active processing cards installed in the system. A fully
loaded system with 13 active processing cards can support 500,000 total subscribers. For additional
information on session capacity licenses, refer System Administration Guide and System Capacities
in this guide.
loaded system with 13 active processing cards can support 500,000 total subscribers. For additional
information on session capacity licenses, refer System Administration Guide and System Capacities
in this guide.
Important:
The hardware configuration and installed features installed affect the maximum number of supported
subscriber sessions.
Step 16 Return to the root prompt by entering the following command:
The following prompt appears:
Step 17 Repeat step 1 through step 16 as needed to create and bind additional FA services to any other interfaces.
Step 18 Verify that your FA services were created and configured properly by entering the following command:
Keyword/Variable
Description
name
Specifies to display a specific FA service with the name
.
all
Specifies to display all configured FA services.
The output is a concise listing of FA service parameter settings for a configured FA service called fa1.
Step 19 Save your configuration as described in Saving Your Configuration.