Руководство По Устранению Ошибки для Cisco Cisco Tunnel Terminating Gateway (TTG)
Service Configuration Procedures
▀ Configuring the Destination Context Attribute
▄ Cisco ASR 5000 Series Access Service Network Gateway Administration Guide
OL-22953-01
The following prompt appears:
Step 4
Configure a name for the destination context by entering:
destination_context_name is the name of the destination context configured on the system containing the interfaces
through which session traffic is routed.
through which session traffic is routed.
Important:
The ip context-name parameter in the subscriber profiles configured on the system corresponds to the
SN-VPN-NAME and SN1-VPN-NAME RADIUS attributes.
Step 5
Return to the Exec mode by entering the following command:
The following prompt appears:
Step 6
Repeat step 1 through step 5 to configure the default subscriber in any other configured source contexts.
Step 7
To verify that your settings for the subscriber named default are correct, enter:
This commands output displays the configured subscriber parameters.
Step 8
Save your configuration as described in Saving Your Configuration.