Руководство По Устранению Ошибки для Cisco Cisco Tunnel Terminating Gateway (TTG)
Content Filtering Service Configuration
▀ Configuring the System for Content Filtering Support
▄ Cisco ASR 5000 Series Content Filtering Services Administration Guide
OL-22959-01
Loading/Upgrading URL Blacklisting Database
Use the following command to load/upgrade the URL Blacklisting database:
Testing URL Blacklisting Functionality
The URL Blacklisting functionality can be tested by appending test URLs/URIs to the blacklist file. The test
URLs/URIs must be added to the testurldb.pub file in the <WEM_Install_Dir>/flash/blacklist/testurldb directory.
URLs/URIs must be added to the testurldb.pub file in the <WEM_Install_Dir>/flash/blacklist/testurldb directory.
The testurldb.pub file must have one URL per line without space. If space is included in the URL entries, the WEM
ignores the URLs with space.
ignores the URLs with space.
Category-based Content Filtering Configuration
This section describes the steps to configure the system for Category-based Content Filtering support.
Step 1
Enable the Enhanced Charging mode for Category-based Static by applying the example configuration in the
Step 2
Configure the global parameters like database path and version for Content Filtering service by applying the example
configuration in the
configuration in the
configuration is not performed, the default values will be used.
Step 3
Create the Active Charging Service and Content Filtering Policy by applying the example configuration in the
Step 4
Configure the Content Filtering Policy Identifier and actions by applying the example configuration in the