Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)

Скачать
Страница из 98
  Service Configuration Procedures 
Creating and Configuring HA Services  ▀   
Cisco ASR 5000 Series Home Agent Administration  ▄  
 
  OL-22980-01 
Notes: 
 
 
 must be the UDP port for the Pi interfaces’ IP socket. 
 
A maximum of 2048 FA-HA Security Parameter Index (SPI) can be configured for each HA service. 
 
 must the longest registration lifetime that the HA service allows in any Registration Request 
message from the mobile node. An infinite registration lifetime can be configured using the no reg-lifetime 
command. 
 
Option: To configure the HA service for controlling the negotiation and sending of the I-bit in revocation 
messages, in the HA Service Configuration Mode, enter the following comand. By default, HA will not send I-
bit in revocation message. 
 
 
Use the bind address command to bind the service to the Pi interface and specify the maximum number of 
subscribers that can access the service. The hardware configuration and features installed can affect the 
maximum subscriber sessions that can be supported. 
 
Option: To set the maximum period of time to set up a session, in the HA Service Configuration Mode, enter the 
following command: 
 
 
 
Create and bind additional HA services to any other interfaces as required. 
 
Verifying HA Service Configuration 
Verify that your HA services were created and configured properly by entering the following command: 
The output is a concise listing of HA service parameter settings similar to the following sample. In this sample, an HA 
service named ha1 was configured.