Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Configuring Chassis for inPilot
Initial Configuration ▀
Cisco ASR 5000 Series inPilot Installation and Administration Guide ▄
OL-22993-01
Notes:
Aside from having ECS capabilities, an ECS Administrator account also has the same capabilities and privileges
as any other system-level administrator account.
You can also create system ECS user account for a config-administrator, operator, or inspector. ECS accounts
have all the same system-level privileges of normal system accounts except that they have full ECS command
execution capability. For example, an ECS has rights to execute every command that a regular administrator
can in addition to all of the ECS commands.
execution capability. For example, an ECS has rights to execute every command that a regular administrator
can in addition to all of the ECS commands.
Note that only Administrator and Config-administrator-level users can provision ECS functionality. Refer to the
Configuring System Settings chapter of the System Administration and Configuration Guide for additional
information on administrative user privileges.
information on administrative user privileges.
Enabling Active Charging
Active Charging must be enabled before configuring charging services.
Use the following configuration example to enable Active Charging:
Notes:
ACS must be enabled in Optimized mode, wherein ACS functionality is managed by SessMgrs. The require
active-charging optimized-mode command enables ACS in Optimized mode.
The require active-charging optimized-mode command must be a part of the boot configuration. If configured
after booting, the configuration must be saved and the system rebooted for the change to take effect.
Creating the Active Charging Service
Use the following configuration example to create an Active Charging Service: