Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Service Configuration Procedures
Creating and Configuring FA Services ▀
Cisco ASR 5000 Series Packet Data Serving Node Administration Guide ▄
OL-22939-01
The system only supports multiple Mobile IP sessions per subscriber if the subscriber‘s mobile node has a static
IP address. The system only allows a single Mobile IP session for mobile nodes that receive a dynamically
assigned home IP address.The hardware configuration and features installed can affect the maximum
subscriber sessions that can be supported.
assigned home IP address.The hardware configuration and features installed can affect the maximum
subscriber sessions that can be supported.
Optionally configure the FA service for controlling the negotiation and sending of the I-bit in revocation
messages by adding the
comand. By default, it will not send I-bit in
revocation message.
Repeat the configuration as needed to create and bind additional FA services to any other interfaces.
Verifying the FA Service
Step 1
Verify that your FA services were created and configured properly by entering the following command:
The output is a concise listing of FA service parameter settings similar the sample displayed below. In this example, a
FA service called fa1 was configured.
FA service called fa1 was configured.