Техническая Инструкция для Cisco Cisco Nexus 5010 Switch
Contents
Introduction
Prerequisites
Requirements
Components Used
Configure
Network Diagram
Physical Network
Logical VSAN View
Configurations
Nexus 5000
QoS Configuration
UCS Manager
NetApp
Verify
Check the State of VFC Interfaces
Verify NetApp and UCS are Logged Into the Fabric
Troubleshoot
Features Configured
VLAN and VSAN Configuration
Spanning Tree and FCoE VLANs
VPC and FCoE VLANs
Priority Flow Control Status
VSAN Membership
Known and Common Problems
Related Information
Introduction
This document outlines the configuration of the Nexus 5000 switch in a Virtual Port Channel (VPC)
configuration to a NetApp storage in order to achieve Fibre Channel over Ethernet (FCoE).
configuration to a NetApp storage in order to achieve Fibre Channel over Ethernet (FCoE).
Prerequisites
Requirements
Cisco recommends that you have knowledge of Unified Computing System (UCS) and Nexus
5000.
5000.
Components Used
The information in this document is based on these software and hardware versions:
2x Nexus 5548 - runs NXOS 5.2. Called bdsol-n5548-05 and -06-.
●