Примечания к выпуску для Cisco Cisco Aironet 350 Access Points

Draft standard 8 is the default setting in VxWorks firmware version 11.05 and earlier, and it might 
remain in effect when you upgrade the VxWorks firmware to version 11.06 or later. Verify the setting on 
the Authenticator Configuration page in the management system to make sure that the best draft standard 
for your network is selected.

Use the Authenticator Configuration page in VxWorks firmware version 11.06 or later to select the draft 
of the 802.1x protocol the access point or bridge radio should use. Follow these steps to set the draft for 
your access point or bridge:

Browse to the Authenticator Configuration page in the access point management system:

On the Summary Status page, click Setup.

On the Setup page, click Security.

On the Security Setup page, click Authentication Server.

Use the 802.1x Protocol Version (for EAP authentication) drop-down menu to select the draft of the 
802.1x protocol the access point or bridge radio should use. Menu options include:

Draft 7—No radio firmware versions compliant with Draft 7 have LEAP capability, so you 
should not need to select this setting.

Draft 8—Select this option if LEAP-enabled client devices that associate with this access point 
or bridge use radio firmware versions 4.13, 4.16, or 4.23.

802.1x-2001 (formerly Draft 10)—This is the default setting in firmware versions 11.06 and 
later. Select this option if client devices that associate with this access point or bridge use 
Microsoft Windows XP EAP authentication or if LEAP-enabled client devices that associate 
with this access point or bridge use radio firmware version 4.25 or later. 

Click Apply or OK to apply the setting. The access point or bridge reboots.

PC/PCI cards 4.23

—

x

—

PC/PCI cards 4.25 and later

—

—

x

WGB34x/352 8.58

—

x

—

WGB34x/352 8.61 or later

—

—

x

AP34x/35x 11.05 and earlier

—

x

—

AP34x/35x 11.06 and later

1

—

x

x

AP34x/35x 11.07 and later

—

x

x

AP34x/35x and BR35x 11.21 
through 12.04

—

x

x

AP12xx 11.40T and later

—

x

x

1.

The default setting in access point VxWorks firmware version 11.06 and later is 802.1x-2001.