Техническая Инструкция для Cisco Cisco Identity Services Engine Software
ISE Version 1.3 Hotspot Configuration Example
Document ID: 118741
Contributed by Michal Garcarz and Nicolas Darchis, Cisco TAC
Engineers.
Feb 11, 2015
Engineers.
Feb 11, 2015
Contents
Introduction
Prerequisites
Requirements
Components Used
Topology and Flow
Configure
WLC
ISE
Verify
Additional Posture
Troubleshoot
Related Information
Prerequisites
Requirements
Components Used
Topology and Flow
Configure
WLC
ISE
Verify
Additional Posture
Troubleshoot
Related Information
Introduction
Cisco Identity Services Engine (ISE) Version 1.3 has a new type of Guest Portal called Hotspot. This type of
portal allows you to provide guest access to the network and does not force the user to provide any
credentials. This document describes how to configure and troubleshoot this functionality.
portal allows you to provide guest access to the network and does not force the user to provide any
credentials. This document describes how to configure and troubleshoot this functionality.
Prerequisites
Requirements
Cisco recommends that you have experience with ISE configuration and basic knowledge of these topics:
ISE deployments and Guest flows
•
Configuration of Wireless LAN Controllers (WLCs)
•
Components Used
The information in this document is based on these software and hardware versions:
Microsoft Windows 7
•
Cisco WLC Version 7.6 and Later
•
ISE Software, Version 1.3 and Later
•
Topology and Flow