Техническая Инструкция для Cisco Cisco Identity Services Engine Software
Contents
Introduction
Prerequisites
Requirements
Components Used
Configure
Network Diagram
Challenges with 3rd party support
Sessions
URL Redirect
CoA
Solution on ISE
Cisco ISE
Step1 Add Aruba wireless controller to network devices
Step2 Configure authorization profile
Step3 Configure authorization rules
Aruba AP
Step1 Captive Portal Configuration
Step2 Radius Server Configuration
Step3 SSID configuration
Verify
Step1 Connection to SSID mgarcarz_aruba using EAP-PEAP
Step2 Web browser traffic redirection for BYOD
Step3 Network Setup Assistant execution
Other flows and CoA support
CWA with CoA
Troubleshoot
Aruba Captive Portal with ip address instead of FQDN
Aruba Captive Portal incorrect access policy
Aruba CoA port number
Redirection on some Aruba devices
References
Related Cisco Support Community Discussions
Introduction
Cisco Identity Services Engine (ISE) version 2.0 supports 3rd Party Integration. This is
configuration example presenting how to integrate wireless network managed by Aruba IAP 204
with ISE for bring your own device (BYOD) services.
configuration example presenting how to integrate wireless network managed by Aruba IAP 204
with ISE for bring your own device (BYOD) services.
Documents explains how to troubleshoot 3rd Party Integration feature on ISE and can be used as
a guide for integration with the other vendors and flows.
a guide for integration with the other vendors and flows.
Notice: Please be aware that Cisco is not responsible for configuration or support of devices from