Руководство По Устранению Ошибки для Cisco Cisco Identity Services Engine 1.1

Contributed by Chris Hannifin, Joshua Deuink, and Andreas Nikas,
Cisco TAC Engineers.
Aug 07, 2013

Introduction
Prerequisites
     Requirements
     Components Used
Create a Monitoring Node Backup

This document describes how to restore a Monitoring Node backup to a server different than the one on which
it was taken.

There are no specific requirements for this document.

The information in this document is based on Cisco Identity Services Engine (ISE) Version 1.1.x.

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.

Generate a backup for the current Monitoring Node via the CLI or the admin GUI.

1. 

Generate a Full Backup On Demand from the target Monitoring Node.

2. 

Check the repository in which the backup is stored for these files:

3. 

Mntdbfull_hostname_date_time.tar.gpg

♦ 

ise_catalog.xml

♦ 

Copy the backup from the current node to the repository which hosts the ise_catalog.xml file.

4. 

Edit the ise_catalog.xml file to point to the backup file you want to restore to the new node. This
example restores a backup named ProductionMNT.gpg.

From:

<void property="fullImage"> 

 <string>mntdbfull_ise−rec5_20130627_110059</string>

5.