Руководство По Устранению Ошибки для Cisco Cisco Identity Services Engine Express License Bundle

Contents

Introduction

Prerequisites

Requirements

Components Used

Configure FIPS Mode on ISE

Common problems while enabling FIPS mode

Problem

Solution

Problem

Solution

Introduction

This document describes the Federal Information Processing Standards (FIPS) compliant
protocols on the Identity Servce Engine (ISE) and the common problems encountered while
enabling FIPS. FIPS are the standards that are developed by the United States Federal
Government for use in computer systems by non-military government agencies and government
contactors.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

The information in this document is based on ISE 2.1 version.

The information in this document was created from the devices in a specific lab environment. All of
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.

Configure FIPS Mode on ISE

In order to ensure the ISE deployment is FIPS compliant, there is an option in ISE to turn on FIPS
mode, navigate to Administration > System > Settings > FIPS.