Техническая Инструкция для Cisco Cisco Identity Services Engine 2.1
Contents
Introduction
Prerequisites
Requirements
Components Used
Background Information
Packet Flow
Configure
Configure ISE
1. Create Network Device Profile
2. Create Network Device
3. Configure DHCP Server
4. Configure Authorization Profile
Configure NAD
Verify
Troubleshoot
Introduction
This document describes the new features in Identity Services Engine (ISE) that allows redirection
to take place with third-party network access devices (NADs).
to take place with third-party network access devices (NADs).
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Guest flow on ISE
●
DNS and DHCP protocols
●
Components Used
The information in this document is based on these software and hardware versions:
Cisco Catalys 2960 series switch
●
Cisco ISE, Release 2.1
●
The information in this document was created from the devices in a specific lab environment. All of
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
Background Information