Руководство Администратора для Cisco Cisco Packet Data Gateway (PDG)
Troubleshooting
Detecting Faulty Hardware ▀
Cisco ASR 5000 System Administration Guide ▄
213
Figure 15. RCC LED Locations
The possible states for all of the RCC LEDs are described in the sections that follow.
RCC Run/Fail LED States
The Run/Fail LED indicates the overall status of the card. This LED should be green for normal operation.
The possible states for this LED are described in the following table. If the LED is not green, use the troubleshooting
information in the table to diagnose the problem.
information in the table to diagnose the problem.
Table 33.
RCC Run/Fail LED States
Color
Description
Troubleshooting
Green
Card powered with no
errors detected.
errors detected.
None needed.
Red
Card powered with
error(s) detected.
error(s) detected.
Errors were detected during the Power On Self Tests (POSTs). It is likely that the errors
were logged to the command line interface during the boot process.
were logged to the command line interface during the boot process.
Refer to Monitoring the System for information on determining the status of system
hardware components.
hardware components.
None
Card powered with
error(s) detected.
error(s) detected.
for troubleshooting information.
Verify that the power source is supplying ample voltage and current to the chassis.