Руководство Администратора для Cisco Cisco Packet Data Gateway (PDG)

Скачать
Страница из 308
Gx Interface Support   
▀  Rel. 9 Gx Interface 
 
 
▄  Cisco ASR 5x00 Home Agent Administration Guide 
166 
   
Important:
  In 12.0 and later releases, no separate license is required for Charging over Gx / Volume Reporting 
over Gx feature. This feature can be enabled as part of "Policy Interface" license.  
Supported Standards
 
The Volume Reporting over Gx feature is based on the following standard: 
3GPP TS 29.212 V9.5.0 (2010-06): 3rd Generation Partnership Project; Technical Specification Group Core Network 
and Terminals; Policy and Charging Control over Gx reference point (Release 9). 
Feature Overview
 
The Volume Reporting over Gx feature provides PCRF the capability to make real-time decisions based on the data 
usage by subscribers. 
Important:
  Volume Reporting over Gx is applicable only for volume quota. 
Important:
  In release 10.0, only total data usage reporting is supported, uplink/downlink level reporting is not 
supported. In 10.2 and later releases, it is supported. 
Important:
  The PCEF only reports the accumulated usage since the last report for usage monitoring and not from 
the beginning. 
Important:
  If the usage threshold is set to zero (infinite threshold), no further threshold events will be generated 
by PCEF, but monitoring of usage will continue and be reported at the end of the session. 
Important:
  In 12.2 and later releases, usage reporting on bearer termination is supported. 
The following steps explain how Volume Reporting over Gx works: 
1.  PCEF after receiving the message from PCRF parses the usage monitoring related AVPs, and sends the 
information to IMSA.
 
2.  IMSA updates the information to ECS.
 
3.  Once the ECS is updated with the usage monitoring information from PCRF, the PCEF (ECS) starts tracking the 
data usage.
 
4.  For session-level monitoring, the ECS maintains the amount of data usage.
 
5.  For PCC rule monitoring, usage is monitored with the monitoring key as the unique identifier. Each node 
maintains the usage information per monitoring key. When the data traffic is passed, the usage is checked 
against the usage threshold values and reported as described in the Usage Reporting section.
 
6.  The PCEF continues to track data usage after the threshold is reached and before a new threshold is provided by 
the PCRF. If a new usage threshold is not provided by the PCRF in the acknowledgement of an IP-CAN 
Session modification where its usage was reported, then usage monitoring does not continue in the PCEF for 
that IP CAN session.
 
Usage Monitoring