Листовка для Cisco Cisco Packet Data Gateway (PDG)
show radius
show radius servers ▀
Cisco ASR 5x00 Statistics and Counters Reference ▄
3801
show radius servers
Table 462. show radius { servers detail Command Output Descriptions
Field
Description
vvvvv
Displays information about the type and state of the RADIUS server.
From left-to-right, the first character represents the RADIUS server Type as one of the following:
From left-to-right, the first character represents the RADIUS server Type as one of the following:
(A) - Authentication
(a) - Accounting
(C) - Charging
(c) - Charging Accounting
(M) - Mediation
(m) - Mediation Accounting
From left-to-right, the second character represents the RADIUS server Preference as one of the
following:
following:
(P) - Primary
(S) - Secondary
From left-to-right, the third character represents the RADIUS server State as one of the following:
(A) - Active
(N) - Not Responding
(D) - Down
(W) - Waiting Accounting-On
(I) - Initializing
(w) - Waiting Accounting-Off
(a) Active Pending
(U) - Unknown
From left-to-right, the fourth character indicates the RADIUS server Administrative Status (which is
saved in the configuration file for re-establishment at reboot) as one of the following:
(E) - Enabled
(D) - Disabled
From left-to-right, the fifth character indicates whether the RADIUS server’s saved Administrative
Status may be overridden at the next reboot:
(O) - Overridden: (Note: to preserve the desired Administrative State, use the appropriate configuration
mode radius [accounting| charging|charging accounting] server command to reset the admin-status.)
(.) - Not Overridden
saved in the configuration file for re-establishment at reboot) as one of the following:
(E) - Enabled
(D) - Disabled
From left-to-right, the fifth character indicates whether the RADIUS server’s saved Administrative
Status may be overridden at the next reboot:
(O) - Overridden: (Note: to preserve the desired Administrative State, use the appropriate configuration
mode radius [accounting| charging|charging accounting] server command to reset the admin-status.)
(.) - Not Overridden
IP
Displays the IP address of the RADIUS server.
Port
Displays the UDP port used to communicate with the RADIUS server.
Group
Display the RADIUS server group to which the server belongs.
Event History
Displays a historical record of state information for the server including a time/date stamp.