для Cisco Cisco Packet Data Gateway (PDG)
Diameter Dictionaries and Attribute Definitions
▀ Diameter AVP Definitions
▄ AAA Interface Administration and Reference, StarOS Release 18
294
Override-Tos-Value
This AVP is of type grouped and is used to override IP ToS value. This AVP may be included more than once if different
ToS value needs to be overridden for uplink and downlink direction.
ToS value needs to be overridden for uplink and downlink direction.
Vendor ID
9
VSA Type
132046
AVP Type
GROUPED
Supported group value(s):
[ OVERRIDE_TOS_DIRECTION ]
[ OVERRIDE_TOS_VALUE_STANDARD ]
[ OVERRIDE_TOS_VALUE_CUSTOM ]
AVP Flag
N/A
Override-Tos-Value-Custom
This AVP specifies the custom ToS value. Customized value can be a decimal from 0 to 63. This AVP will be present
only when Override-Tos-Value-standard is not provided.
only when Override-Tos-Value-standard is not provided.
Vendor ID
9
VSA Type
132049
AVP Type
UINT32
AVP Flag
N/A
Override-Tos-Value-Standard
This AVP specifies the standard ToS value. Valid standard value can be af11 or af12 or af13 or af21 or af22 or af23 or
af31 or af32 or af33 or af41 or af42 or af43 or be or ef, since these are the only standard ToS values configured through
CLI as per RFC 2597. This AVP will be present only if Override-Tos-Value-Custom AVP is not present.
af31 or af32 or af33 or af41 or af42 or af43 or be or ef, since these are the only standard ToS values configured through
CLI as per RFC 2597. This AVP will be present only if Override-Tos-Value-Custom AVP is not present.
Vendor ID
9
VSA Type
132048
AVP Type
ENUM
Supported enumerated value(s):