для Cisco Cisco Packet Data Gateway (PDG)
Troubleshooting
Detecting Faulty Hardware ▀
ASR 5000 System Administration Guide, StarOS Release 18 ▄
225
Checking the LEDs on the RCC
Each RCC is equipped with status LEDs as listed below:
Run/Fail
Active
Standby
Figure 15. RCC LED Locations
The possible states for all of the RCC LEDs are described in the sections that follow.
RCC Run/Fail LED States
The Run/Fail LED indicates the overall status of the card. This LED should be green for normal operation.
The possible states for this LED are described in the following table. If the LED is not green, use the troubleshooting
information in the table to diagnose the problem.
information in the table to diagnose the problem.